XF WOMEN / MACHA

It combines improved response with light and easy movement.

While maintaining the same base design that prioritizes efficient power transmission to the board, a large stabilizer has been added to the heel side. By using a highly resilient material, the board can transmit power to the board without losing it, while expanding the range of motion to the left and right.

In addition, the Boost FootOn+ is 4mm higher than a regular footbed and has a softer center section, which creates a concave shape when you step in, allowing for more powerful edging.

Retro-Mod Highback

The exterior has a classic symmetrical shape, while the interior has an asymmetrical design that follows the movement of the boot while providing resilience and improving torsional control during landings.

Super Tough Nylon

A medium flex material that is suitable for all speeds, from low to high, and for beginners to experts.

Redux Lean Adjuster

Compact and lightweight, it can be easily adjusted with one action.

Micro Adjuster

Moving it forward by one notch will tilt the chair forward by approximately 2.5 degrees, allowing for more precise highback settings.

Super Ultima Baseplate

The new generation standard for FLUX is equipped with a stabilizer that converts power transmission into rebound force to maximize the board's bounce.

Performance Blend

The most versatile medium flex for all riding situations.

Boost FootOn+

The center is made of a soft material, which naturally creates a concave shape when you step on it, making it easier for the toe and heel to step in. Of course, the surface is made of a material that does not easily attract snow.

Adjustable Toe & Heel Cushion

Movable cushions that can be adjusted at the toe side and heel site to suit boot size and board width.

Responsive Stabilizer

This large stabilizer is designed for XF with an emphasis on quick response and power transmission. It uses high-rebound TPU material to protect the board while boasting high response performance.

5-hole highback rotation

Five highback mounting holes allow rotation at both foot forward angles.

Flat Bottom

The base plate has been flattened to reduce unevenness, allowing for direct power transmission to the top sheet of the board.

Waffle Strap

It has a two-layer structure consisting of a waffle cushion that provides such a comfortable hold and ease of movement that you'll forget you're wearing it, and a Power Strap that transmits power directly.

Beer Buckle

The newly designed ratchet buckle tightens securely down to the last swift tightening. It also comes with a bottle opener for hassle-free toasts.

FTM VER.5.0

This Transfer strap is designed specifically for the Flex Flex, with a strong center line and flexible upper and lower ends for a better fit with your boots, increasing the power transmission.

L-Guide

The belt stows smoothly, preventing it from getting caught in the snow during toeside turns.

UU Fit

The strap belt attached between the heel cup and highback provides a 360-degree support system that holds the boot in place, providing a natural hold and even pressure.

Multi Disc

Multi-disc that can be installed in either 4x4 or 2H. Can also be installed with a 5mm or 10mm offset from the front or back or left or right.

Toolless Lever

The best setting can be achieved without tools. A stopper is included to prevent the screws from loosening.